1. The cell which is used as standard cell is:
a) Dry cell
b) Solar cell
c) Mercury-Cadmium cell
d) Zinc-Carbon cell
2. The emf of a primary cell depends upon the:
a) Physical dimension of the cell
b) Nature of the electrolyte
c) Nature of the electrode
d) Both (b) and (c)
3. When two cells are connected in parallel, it should be ensured that they have:
a) Identical internal resistance
b) Equal emfs
c) Same make
d) Same ampere-hour capacity
4. The law that finds application in electrolysis is:
a) Faraday's law
b) Coulomb's law
c) Ohm's law
d) Lenz's law
5. During the discharge of lead acid battery, the terminal voltage decreases with the decrease in:
a) Temperature
b) Discharge rate
c) State of charge
d) None of the above
6. Vent plug is provided in each lead acid cells to:
a) Pour water or electrolyte when needed
b) Check the electrolyte level
c) Allow escape out of gases during charging
d) All the above
7. The capacity of battery is expressed in:
a) Amperes
b) Ampere-hours
c) Watts
d) Watt-hour
8. The capacity of lead acid battery is adversely by increase in:
a) Discharge rate
b) Charge rate
c) Temperature
d) Specific gravity of the electrolyte
9. Cells are connected in series in order to increase the
a) Current capacity
b) Life of the cells
c) Voltage ratings
d) Terminal voltage
10. Internal voltage drop of a voltage source:
a) Independent of the load current supplied
b) Depends on the internal resistance of the source
c) Does not influence the terminal voltage
d) Does affect the emf of the source
a) Dry cell
b) Solar cell
c) Mercury-Cadmium cell
d) Zinc-Carbon cell
2. The emf of a primary cell depends upon the:
a) Physical dimension of the cell
b) Nature of the electrolyte
c) Nature of the electrode
d) Both (b) and (c)
3. When two cells are connected in parallel, it should be ensured that they have:
a) Identical internal resistance
b) Equal emfs
c) Same make
d) Same ampere-hour capacity
4. The law that finds application in electrolysis is:
a) Faraday's law
b) Coulomb's law
c) Ohm's law
d) Lenz's law
5. During the discharge of lead acid battery, the terminal voltage decreases with the decrease in:
a) Temperature
b) Discharge rate
c) State of charge
d) None of the above
6. Vent plug is provided in each lead acid cells to:
a) Pour water or electrolyte when needed
b) Check the electrolyte level
c) Allow escape out of gases during charging
d) All the above
7. The capacity of battery is expressed in:
a) Amperes
b) Ampere-hours
c) Watts
d) Watt-hour
8. The capacity of lead acid battery is adversely by increase in:
a) Discharge rate
b) Charge rate
c) Temperature
d) Specific gravity of the electrolyte
9. Cells are connected in series in order to increase the
a) Current capacity
b) Life of the cells
c) Voltage ratings
d) Terminal voltage
10. Internal voltage drop of a voltage source:
a) Independent of the load current supplied
b) Depends on the internal resistance of the source
c) Does not influence the terminal voltage
d) Does affect the emf of the source
why answer is B in question number 5
ReplyDeletepls tell me
Good
ReplyDelete