1. The solar or photo voltaic cell converts:
a) Chemical energy to electrical energy
b) Solar radiation into electrical energy
c) Solar radiation into thermal energy
d) Thermal energy into electrical energy
2. Solar cells are made of:
a) Aluminium
b) Germanium
c) Silicon
d) Cadmium
3. A module is a:
a) Series-arrangement of solar cells
b) Parallel arrangement of solar cells
c) Series-parallel arrangement of solar cells
d) None of the above
4. The efficiency of solar cells is about:
a) 25%
b) 15%
c) 40%
d) 60%
5. The voltage of solar cells is:
a) 0.5 to 1 V
b) 1 to 2 V
c) 2 to 3 V
d) 4 to 5 V
6. The output of solar cells is of the order of:
a) 0.5 watts
b) 1.0 watts
c) 5.0 watts
d) 10 watts
7. Sun tracking system is required in the case of:
a) Cylindrical and parabolic and paraboloid
b) Flat plate collector
c) Both (a) and (b)
d) None of the above
8. Which of the following area is preferred for solar power plants:
a) Coastal areas
b) Hot arid zones
c) Mountain tops
d) High rainfall zones
9. Most of the solar radiation received on the earth surface is within the range of:
a) 0.25 to 0.4 micron
b) 0.4 to 0.8 microns
c) 0.6 to 0.95 microns
d) 0.1 to 0.25 microns a
10. The energy radiated by the sun in bright sunny day is about:
a) 2.5 kW/m2
b) 1.0 kW/m2
c) 500 W/m2
d) 200 W/m2
a) Chemical energy to electrical energy
b) Solar radiation into electrical energy
c) Solar radiation into thermal energy
d) Thermal energy into electrical energy
2. Solar cells are made of:
a) Aluminium
b) Germanium
c) Silicon
d) Cadmium
3. A module is a:
a) Series-arrangement of solar cells
b) Parallel arrangement of solar cells
c) Series-parallel arrangement of solar cells
d) None of the above
4. The efficiency of solar cells is about:
a) 25%
b) 15%
c) 40%
d) 60%
5. The voltage of solar cells is:
a) 0.5 to 1 V
b) 1 to 2 V
c) 2 to 3 V
d) 4 to 5 V
6. The output of solar cells is of the order of:
a) 0.5 watts
b) 1.0 watts
c) 5.0 watts
d) 10 watts
7. Sun tracking system is required in the case of:
a) Cylindrical and parabolic and paraboloid
b) Flat plate collector
c) Both (a) and (b)
d) None of the above
8. Which of the following area is preferred for solar power plants:
a) Coastal areas
b) Hot arid zones
c) Mountain tops
d) High rainfall zones
9. Most of the solar radiation received on the earth surface is within the range of:
a) 0.25 to 0.4 micron
b) 0.4 to 0.8 microns
c) 0.6 to 0.95 microns
d) 0.1 to 0.25 microns a
10. The energy radiated by the sun in bright sunny day is about:
a) 2.5 kW/m2
b) 1.0 kW/m2
c) 500 W/m2
d) 200 W/m2
Thanks for sharing...
ReplyDeleteYour information is really good. Helping for the novice. I would like to suggest some current facing threats to the globe due to the excessive use of exhaustible source of energy. For efficient use of solar energy you can also visit, http://parasplanet.com/efficient-on-grid-solar-system/
ReplyDelete10q so much...
ReplyDeleteThis comment has been removed by the author.
ReplyDelete10q so much...
ReplyDeleteNumber of question should be increased
ReplyDeleteThankyou sir
ReplyDeleteThank you
ReplyDeleteJadhavganesh26602@gmail.com
ReplyDeletejadhavganesh26602@gmail.com
ReplyDeleteReally Helpful
ReplyDeleteThanks you so much sir
ReplyDelete